18″ SOTM5 6.5 CREEDMOOR PRS RIFLE, FDE CERAKOTE®
Both sides of the rifle as built. Zoom in and inspect it.
Scroll or pinch to zoom · drag to pan · double-click to magnify · keys + − 0 and arrowsPinch to zoom · drag to pan · double-tap to magnify
CONFIGURATION SHOWN: 18″ Faxon Match Series Gunner profile 6.5 Creedmoor barrel, 416-R stainless, 5R button rifled, 1:8 twist, QPQ nitrided, with a Faxon Gunner 7.62 MuzzLok® 3-port removable muzzle brake; rifle-length RIFLESPEED adjustable gas system with the gas block pinned to the barrel with a steel coil spring pin; 15″ SOT Wedge-Lock M-LOK® handguard; SOTM5 MOD-0 thermal-fitted 7075-T6 aluminum billet upper receiver, no forward assist, LR-308 DPMS high pattern, with laser-engraved T-marks; Breek Arms WARHAMMER Mod2 charging handle in black; ejection port dust cover engraved 6.5 CREEDMOOR (shown); Toolcraft 6.5 Creedmoor double-ejector bolt carrier group, black nitride, with the bolt laser engraved “6.5 CREEDMOOR”; paired with the SOTM5 7075-T6 aluminum billet lower receiver with upper receiver tension screw, LaRue Tactical MBT-2S two-stage trigger with curved bow, rifle-length receiver extension with JP Enterprises tuned and polished buffer spring, Forward Controls Design RBF reinforced buffer retainer, Radian Weapons Talon® 45/90 ambidextrous safety selector, Battle Arms Development enhanced AR-308 steel pivot and takedown pins, ambidextrous bolt release (SOT proprietary serrated right-side release shown), ambidextrous magazine release (right-side button shown), Magpul PRS® GEN3 stock, Magpul MOE® K2-XL grip and Magpul PMAG® 20 LR/SR GEN M3™ magazine; upper, lower and handguard finished in FDE Cerakote®.
CONFIGURATION SHOWN: 18″ Faxon Match Series Gunner profile 6.5 Creedmoor barrel, 416-R stainless, 5R button rifled, 1:8 twist, QPQ nitrided, with a Faxon Gunner 7.62 MuzzLok® 3-port removable muzzle brake; rifle-length RIFLESPEED adjustable gas system with the gas block pinned to the barrel with a steel coil spring pin; 15″ SOT Wedge-Lock M-LOK® handguard (SECOND OF TEN mark shown); SOTM5 MOD-0 thermal-fitted 7075-T6 aluminum billet upper receiver, no forward assist, LR-308 DPMS high pattern, with laser-engraved T-marks; Breek Arms WARHAMMER Mod2 charging handle in black; Toolcraft 6.5 Creedmoor double-ejector bolt carrier group, black nitride, with the bolt laser engraved “6.5 CREEDMOOR”; paired with the SOTM5 7075-T6 aluminum billet lower receiver (SECOND OF TEN LLC · STUART, FL and MOD: SOT M5 · CAL: MULTI rollmarks shown) with upper receiver tension screw, LaRue Tactical MBT-2S two-stage trigger with curved bow, rifle-length receiver extension with JP Enterprises tuned and polished buffer spring, Forward Controls Design RBF reinforced buffer retainer, Radian Weapons Talon® 45/90 ambidextrous safety selector (shown, configured at 90°), Battle Arms Development enhanced AR-308 steel pivot and takedown pins, ambidextrous bolt release (paddle-style oversized bolt catch shown), ambidextrous magazine release with an extended left-side release (shown), Magpul PRS® GEN3 stock, Magpul MOE® K2-XL grip and Magpul PMAG® 20 LR/SR GEN M3™ magazine; upper, lower and handguard finished in FDE Cerakote®.
The gas system is adjustable at the block
A RIFLESPEED gas control lets the rifle be tuned to the load and to a suppressor, rather than being fixed by port size at manufacture. On a large-frame 6.5 Creedmoor, where ammunition varies widely, that is the difference between a rifle that runs one load well and one that can be set for the load in hand. The gas block is pinned to the barrel with a steel coil spring pin, in line with the Bombproof by Design™ philosophy.
The selector is configured at 90°
The Radian Weapons Talon® 45/90 can run as a standard 90° selector or a 45° short throw by rotating the shaft 180° inside the lower receiver. It is installed at 90° and can be reconfigured by the end user.
The buffer retainer is reinforced
The Forward Controls Design RBF replaces the standard buffer retainer, a small part that takes repeated impact on a large-frame rifle. It is a durability choice, not an accuracy feature.
* A note on the name
SOTM5 names the rifle; the serialized part is the lower receiver. MOD-0 names the thermal-fitted billet upper, here without a forward assist. PRS identifies the stock configuration, built with the Magpul PRS® GEN3. The serial number on the left side has been blurred in this photograph; no other marking has been altered.
// Specifications
| Model | SOTM5 *18″ PRS rifle |
|---|---|
| SKU | RFL-M5-65CM-B180-FDE |
| Chambering | 6.5 Creedmoor |
| Length · weight | 40″ overall10 lb 3 oz |
| Barrel | 18″ Faxon Match Series, Gunner profile1:8 twist · 5R button rifled · 416-R stainless · QPQ nitride |
| Muzzle | Threaded 5/8×24Faxon Gunner 7.62 MuzzLok® 3-port brake, removableDirect-thread suppressor ready with the brake removed |
| Gas system | RIFLESPEED adjustableGas block pinned to the barrel with a steel coil spring pin · rifle length |
| Handguard | 15″ SOT Wedge-LockM-LOK® · free float · FDE Cerakote® |
| Upper receiver | SOTM5 MOD-0 billet, no forward assist7075-T6 aluminum · LR-308 DPMS high patternLaser-engraved T-marks · dry film lubedThermal fitted · FDE Cerakote® |
| Charging handle | Breek Arms WARHAMMER Mod2, AR-10Black |
| Dust cover | Engraved 6.5 CREEDMOOR |
| Bolt carrier group | Toolcraft AR10 6.5 CreedmoorDouble ejector · black nitrideBolt laser engraved “6.5 CREEDMOOR” |
| Lower receiver | SOTM5 billet, marked MULTI7075-T6 aluminum · upper receiver tension screw |
| Trigger | LaRue Tactical MBT-2STwo-stage · curved bow · 4.5 lb |
| Receiver extension | Rifle lengthBlack anodized |
| Buffer | Standard rifle length |
| Buffer spring | JP Enterprises Tuned and Polished308 rifle (JPS-OSR.308) |
| Buffer retainer | Forward Controls Design RBFReinforced |
| Safety selector | Radian Weapons Talon® 45/90Ambidextrous · configured at 90° |
| Takedown and pivot pins | Battle Arms DevelopmentEnhanced AR-308 pin set · steel |
| Bolt release, left | Paddle-style oversized bolt catch |
| Bolt release, right | SOT proprietary, serrated |
| Magazine release | AmbidextrousExtended left-side release · right-side button |
| Stock | Magpul PRS® GEN3Black |
| Grip | Magpul MOE® K2-XLBlack |
| Magazine | Magpul PMAG® 20 LR/SR GEN M3™Plain and unmarked, includedMagazines shown in photographs may differ |
| Options | Magpul MBUS 3 front & rear sights, +$75Lancer L7AWM® 20-round, Translucent Dark Earth or Translucent Smoke, in place of the standard magazine, +$20 |
| Finish | FDE Cerakote®Upper, lower and handguard · furniture black |
Photography © Second of Ten LLC. Battle Arms Development, Breek Arms, Faxon Firearms, Forward Controls Design, JP Enterprises, Lancer Systems, LaRue Tactical, Magpul, NIC Industries, Radian Weapons, RIFLESPEED and Toolcraft names and marks, including Cerakote®, MuzzLok®, MBT-2S, M-LOK®, MOE®, L7AWM®, MBUS®, PMAG®, GEN M3™, PRS® and Talon®, are the property of their respective owners. Their appearance indicates that Second of Ten incorporates the component, not sponsorship, affiliation or endorsement.