Description
The 16″ Monobloc® Complete Upper pairs an HM Defense Monobloc® barrel with the SOT Standard forged upper receiver with no forward assist, for a clean, snag-free right side. The gas block is milled straight into the metal of the barrel blank during manufacturing, so there is no separate block to clamp, pin or align.
It ships as a complete upper with the SOT Enhanced HMB™ bolt carrier group, a Breek Arms WARHAMMER Mod2 ambidextrous charging handle and a 14″ Midwest Industries Slim Line one-piece free-float M-LOK handguard, ready to install on any Mil-Spec AR-15 lower receiver.
At 4 lb 0.5 oz it is the lightest 16″ upper in the Monobloc range: the one-piece Slim Line handguard makes it 3.7 oz lighter than the same upper with the 13″ SOT Wedge-Lock M-LOK handguard.
Every SOT upper is built by our team to a strict, documented set of standards and processes. Bombproof by Design™.
Barrel
- 16″ HM Defense Monobloc® barrel, 5.56×45mm NATO chamber, .223 Remington compatible
- 4150 chrome-moly steel, standard (unlined) bore
- Balanced barrel taper/profile
- 1:8 twist
- 1/2×28 muzzle thread
- Mid-length gas system
- Gas block milled straight into the metal of the barrel blank during manufacturing, so there is no separate block to clamp, pin or align
- Threaded barrel extension
- Black Cerakote® finish
Upper Receiver
- SOT Standard Upper Receiver, assembled AR-15, no forward assist
- Machined from 7075-T6 forged aluminum
- Anodized, black
- No forward assist: a cleaner, lighter right side with nothing to snag on gear or slings
- Standard Mil-Spec build: the barrel is installed to Mil-Spec, with no thermal fit and no bedding compound
- Ejection port cover marked MONOBLOC / 5.56 NATO
- Works with standard AR-15/M16 components
- Made in the USA
Bolt Carrier Group
- SOT Enhanced HM Defense HMB™ bolt carrier group, Black Nitride (Melonite®)
- Bolt: 9310 steel, CNC machined with a blind cam pin socket instead of a through-hole
- Carrier: 9310 steel, Mil-Spec M16 full-auto profile
- Cam pin: 4340 hardened steel, custom radiused design to fit the socket
- Weight: approximately 12.72 oz
- SOT arrow-indexed cam pin, which ensures the cam pin is always installed in the same direction for better wear and cam pin life
- Index-marked gas key
- Platform: AR-15 / M16, compatible with standard Mil-Spec upper receivers
- The HMB™ bolt group is also compatible with .300 AAC Blackout, 6mm MAX and 350 Legend. This upper is chambered in 5.56×45mm NATO and is .223 Remington compatible.
Charging Handle
- Breek Arms WARHAMMER Mod2 AR-15 ambidextrous charging handle, black
- Oversize ambidextrous release latches on both sides with textured grooves for gloved hands, set wide and back to clear large optics
- One-handed operation from either side
- Gas relief cuts on the top and bottom of the stem vent gas out the side instead of toward the shooter’s face, and a raised rear shelf covers the back of the upper receiver; both help most when shooting suppressed
- 7075-T6 aluminum handle and latches, Type III hard-coat anodized
- Just under 1 oz; 2.78″ across the handles
- Made in the USA by Breek Arms
Handguard
- 14″ Midwest Industries Slim Line one-piece free-float M-LOK handguard
- Super-slim profile: 1.5″ outside diameter, 1.3″ inside diameter
- Full-length MIL-STD-1913 Picatinny top rail, M-LOK slots on three sides
- 6061 aluminum, Type 3 hard-coat anodized, black, fully dehorned and deburred
- 4140 heat-treated barrel nut with Midwest Industries’ patented 4140 heat-treated torque plate
- Two integral anti-rotation QD sling sockets
- 11.0 oz installed
- Made in the USA
Muzzle
- A2 Extended Flash Hider, Black Cerakote®, standard
- Optional add-on: 4-port hardened flash hider, Black Cerakote®, $40.00
- Optional add-on: Faxon removable MuzzLok® muzzle brake, $60.00
- Optional add-on: Faxon MuzzLok® Plan B muzzle brake, $80.00 (17-4 PH stainless steel, nitride finish, timed with a left-hand nut; its Plan B interface accepts a Plan B-to-HUB adapter for hub-mount suppressors, adapter sold separately)
- Other muzzle devices and suppressor mounts are available; contact us directly to discuss options.
Sights
- None standard: the full-length top Picatinny rail is ready for the optic of your choice
- Optional add-on: Magpul MBUS 3 front & rear flip-up sight set (MAG1166-MAG1167), black, $75.00: impact-resistant polymer, spring-loaded with an ambidextrous push-button, tool-less front elevation, rapid-select rear aperture, 0.44″ high folded, standard AR height deployed, Picatinny mount, made in the USA
What Ships & What Fits
- Ships as a complete upper receiver group, including bolt carrier group and charging handle
- Fits any Mil-Spec AR-15 lower receiver
- Works with carbine, VLTOR A5 and rifle buffer systems
Ships direct. An upper receiver is not a firearm, so no FFL transfer, background check or dealer fee is required in most states. Some state and local exceptions apply.
Inspect this upper up close: zoom in on both sides →
Shipping: a complete upper is not a firearm and ships direct to you. We do not ship upper receivers to CA, CT, DE, DC, HI, IL, MA, NJ, NY, RI or WA, or to Denver, CO or Cook County/Chicago, IL. Monobloc® uppers are marked and marketed as HBAR and can ship to Maryland.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Reviews
There are no reviews yet.