SOT Enhanced DLC+ Bolt Carrier Group

$220.00

Carbon has nothing to hold onto. And the marks tell you nothing has moved.

Description

DLC is a thin-film coating with a hardness far beyond nitride or phosphate and a very low coefficient of friction. On a carrier group that means two things an operator actually notices: it runs as though it is oiled when it is dry, and carbon wipes off a surface that gives fouling almost nothing to key into. The DLC here is applied over a high-gloss polished finish, so it is smooth as well as hard — polish is what removes the microscopic peaks that carbon otherwise builds on.

Underneath the finish it is the same Microbest group that goes to the military and to other small arms manufacturers: 8620 full-auto carrier, C158 bolt, individually High Pressure Tested and Magnetic Particle Inspected, OCKS carrier key screws, and a gas key whose mil-spec opening is verified and alignment checked. The bore is chrome lined, so the inside of the carrier gets its own hard surface rather than relying on the outer coating.

SKU: BCG-MBEST-DLCP-E

Full specifications, fitting notes and warnings: SOT Enhanced DLC+ Bolt Carrier Group — product page.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Additional information

Weight 1.0 lbs
Dimensions 9 × 3 × 2 in
Manufacturer part number

MBEST-BCG-DLC-PLUS

Carrier

8620 tool steel, full-auto M16 cut, DLC

Bolt

C158 steel, DLC, shot peened, High Pressure Tested, Magnetic Particle Inspected

Finish

DLC on the outer wear surfaces, over a high-gloss polished finish. Chrome-lined inner bore

Gas key

4130 steel, phosphate and chrome lined. OCKS hardware by Michiguns, properly staked. Mil-spec opening verified, optimum alignment checked

Cam pin

4340 steel, DLC finish

Firing pin

8640, chrome plated

Ejector

S7 tool steel, shot peened

Extractor

4140 steel, phosphate finish, black extractor insert

Springs

Sprinco extractor spring · Sprinco ejector spring

Weight

11.6 oz

Enhanced adds

SOT arrow-index-marked cam pin (arrow point faces toward the bolt face) and index-marked gas key (single engraved line across the key and both screw heads)

Compatibility

Mil-spec AR-15 / M4 upper receivers. 5.56 mm NATO, 6mm MAX, .300 BLK and .350 Legend share this bolt face

Reviews

There are no reviews yet.

Be the first to review “SOT Enhanced DLC+ Bolt Carrier Group”

Your email address will not be published. Required fields are marked *